How to Use
Purple Rain 3 is easy to use and ideal in the vital decontamination process. It works so well with our Just The Tonic and our cleaner clay to remove all unwanted contamination.
Purple Rain sets to work as soon as its applied to the surface, pulling the contamination off in a purple/red colour streak.
Clean your wheels thoroughly with one of our AD wheel cleaners along with the DBS brush set and the EZ wheel brush. When your wheels are clean and free from dirt and dry, apply Purple Rain 3 liberally to the surface, make sure the surface is cool before application. When Purple Rain 3 is applied on the surface the product starts to react with the contaminants immediately, This procedure will last approx 3-4 minutes (do not let the product completely dry out), then the purple/red colour will start to fade, at this point its time to remove the excess residue from the surface by rinsing or you can agitate the surface with our DBS brush set and EZ brush to remove stubborn contamination from alloy wheels or a standard microfibre towel from the paintwork. Thoroughly pressure rinse the entire surface when the clean is completed.